CubePilot
CubePilot- The Cube Orange+ Standard Set with ADS-B Carrier Board (HX4-06222)
0 - Yorum Yap
Stok Kodu
HX4-06222
76.200,00 TL KDV Dahil
7.154,55 TL'den
başlayan taksitlerle!
başlayan taksitlerle!
CubePilot- The Cube Orange+ Set with ADS-B Carrier Board (HX4-06222)
Package contains:
- 1 x The Cube Orange + with the ADS-B Carrier Board
- 1 x Power Brick Mini
- 1 x Buzzer Cable
- 2 x CAN Cable
- 2 x I2C Cable
- 2 x Power Brick Mini Cable
- 1 x GPS1 GH Cable
- 2 x Telem Cable
- 1 x I2C Board
- 4 x Screws
- 3 x 3M Large Sticker
- 2 x 3M Medium Sticker
- 4 x 3M Small Sticker
Features
1. Faster H7 SOC with 1MB ram.
2. Upgraded triple redundant IMU sensors for extra redundancy.
3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.
4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.
5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).
6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems.
7. Manufacturers can design their own carrier boards to suit their specific needs now and in the future.
For more details, please check the CubePilot official doc:
https://docs.cubepilot.org/user-guides
Bu ürüne ilk yorumu siz yapın!